skip to Main Content
Image of Wheels Manufacturing BB30 to Standard HT2 24mm Crank Conversion, Black

Use this conversion kit to fit standard Hollowtech II (or compatible) cranks to fit into a BB30 Bottom Bracket. The shims press directly into the BB30 (6086) bearings and you can then slide your crank axle through as though it were a normal HT2 Bottom Bracket.  Removal is easy too, you may need to lightly tap out the shims from the bearing.

Review This Product

Best Price: £33.14 from Tweeks Cycles

Stockist Catalogue Product Name Price
Tweeks Cycles Wheels Manufacturing BB30 to Standard HT2 24mm Crank Conversion, Black £33.14 Visit Store

Related Sports Products

Image of Wheels Manufacturing Crank Spindle Shims - Black - BB30 To 24mm, Black

Wheels Manufacturing Crank Spindle Shims - Black - BB30 To 24mm, Black

Wheels Manufacturing Crank Spindle ShimsSimple to install, these BB30 bottom bracket adaptors enable you to run Shimano crankset and other brands with 24mm spindles bikes that are normally only compatible with 30mm spindle types. Simply press these Wheels Manufacturing shims into the BB30 bearings and...

Image of Wheels Manufacturing Emergency Derailleur Hanger - For QR Wheels

Wheels Manufacturing Emergency Derailleur Hanger - For QR Wheels

An essential emergency hanger that allows the rider to get home by re-attaching the rear derailleur to the bike in the event of a derailleur hanger failure. It attaches to any dropout and is held in place by the quick release skewer. It allows access to about half of your bikes shifting range and can...

Image of Wheels Manufacturing 2mm Chainring Spacer

Wheels Manufacturing 2mm Chainring Spacer

Can't stand that annoying click that an off centre chainline can produce Well it sounds like you have line alignment issues. To rectify this problem sort your chainline out with these hand chainring spacers from Wheels Manufacturing. Get the spacing right on your chainset for smooth shifting...


Search or browse by merchant, category or brand
Back To Top